Bookcase 4 levels in CP Birch, by Jean-Christophe

Construction of a bookcase in 18mm thick birch plywood. It is made up of 4 storage levels and 6 vertical uprights. Its construction does not require glue. The different plates rest on threaded rods bolted to the uprights.

Once you have received the boards, all you need to do is drill 3 holes with a diameter of 13mm in the height of the uprights (each upright is identical). For hardware, provide threaded rods with a diameter of 10mm and flat head binder nuts (head diameter 22.5mm, sub-head length 18mm) in black zinc x18. The threaded rods must also be cut to the correct length (9 rods of 36.5cm). Assemble the bookcase flat before straightening it. To finish, you just need to screw the upper plate using a screw at each upright.

Lxhxd: 140x129x38.6cm